Bogen

Bogens Ceiling Speaker Assemblies consist of an 8 Cone Speaker (S86 or S810) pre-assembled onto a 13 steel ceiling grille painted with off-white (PG8W) or bright white (PG8U) enamel. Options for these assemblies are recessed volume control (VR) volume control with knob (VK) and rear-mounted screw terminal strip ...
More details

8W 8 6 oz. magnet 50 Hz to 12 KHz 95 dB 70.7V: 4 2 1 1/2 1/4 1/8W 25V / 70V transformer bright white grill (S86T725PG8W).

Features4-watt capacity8 in. cone speaker for excellent audio quality6 different power taps (4 2 1 1/2 1/4 1/8 W). T725 4-watt transformerOff-white enamel over steel grille (". W" versions). Bright white enamel over steel grille (". U" versions). Pre-assembled for ...
More details

Bogen's Ceiling Speaker Assemblies consist of an 8 in. Cone Speaker (. S86 or S810) pre-assembled onto a 13 in. steel ceiling grille painted with off-white (. PG8W) or bright white (. PG8U) enamel. Options for these assemblies are recessed volume control (. VR) volume control with ...
More details

Features4-watt capacity8 in. cone speaker for excellent audio quality6 different power taps (4 2 1 1/2 1/4 1/8 W). T725 4-watt transformerOff-white enamel over steel grille (". W" versions). Bright white enamel over steel grille (". U" versions). Pre-assembled for ...
More details

Bogen Model ASWG1DK with volume control knob allows adjustment of the paging level at each speaker location in the system; detachable knob available on ASUG1DK and ASWG1DK. The speaker is available on an off-white ceiling grille (Model ASWG1 and ASWG1DK) or on a bright white ceiling grille (ASUG1 and ASUG1DK)....
More details

Installs into a variety of ceiling environments including suspended and hard surface ceilings. Large heavy-gauge plated steel back can for deep bass response. Computer-matched dual venting system for full bass output. Wide dispersion coaxial driver provides broad even coverage. Good off-axis response with smooth ...
More details

6-3/4 mounting depth for installations into a variety of ceiling environments including suspended and hard surface ceilings. Low-profile housing allows greater range of installation depths. Computer-matched venting system for full bass output. Wide dispersion coaxial driver provides broad even coverage. For 16-ohm ...
More details

Fits any ceiling tile grid requires no mounting accessories 5W 8 cone with secondary high frequency cone 70V / 25V transformer 5 2 0.5 and 0.25W tap settings selectable by rotary switch integral tile support rail perforated grille over entire front of speaker fully enclosed industrial grade steel construction for ...
More details

Bogens CSD2X2 Drop-In Ceiling Speaker is a full-range speaker that allows for fast and easy installation which saves installation time effort and cost. The CSD2X2 is a 2x 2 speaker that fits perfectly into place in 2x2 ceiling grids -without needing to cut ceiling tiles or requiring the use of tile support rails. ...
More details

Fits into 2 x 2 ceiling frames 4W 70V / 25V transformer 4 2 0.5 0.25 watt tap settings selectable by rotary switch tile support rail for 2 x 4 included finely perforated grille over entire front of speaker fully enclosed industrial grade steel construction plenum rated 8 main cone with secondary high frequency ...
More details

Sold in pairs. One-piece assembly in 2 x 2 ceilings saves installation time effort and cost. Tile support rail for 2 x 4 ceilings included. Perforated grill over entire front.8 Cone speaker with 10 oz. magnet and tweeter and 25/70V transformer.

FeaturesFinely perforated grille over the entire front of speakerFully enclosed industrial grade steel constructionEnclosed Back Can8 in. main cone with secondary high-frequency cone70V/25V 4-watt transformer (4 2 1 0.5 0.25 watt) taps; selected by rotary switchSeismic attachment pointsGrille finishVR ...
More details

- Bogen 2 pack of ceiling speakers- 95Hz - 20kHz Frequency response- 94dB SPL @ 1W / 1m- 100 Degree dispersion @ 2kHz (6dB down)- Treated paper cone- 8 Main cone with secondary high frequency cone- 10oz Magnet weight- Connection via wire nuts- Off-white finish- Back can- Recessed volume control- Speaker assembly ...
More details

The Bogen MPS1W Mini Pendant Speaker (. White) is an excellent choice for high ceiling and open space environments. The speaker's acoustic design delivers superb articulation and high intelligibility where paging and music applications are required. The sound performance technology is wrapped in ...
More details

The TB8 is a load-bearing support. Designed to mount behind a ceiling tile this steel bridge will distribute the weight of a speaker grille and protective enclosure onto the ceiling grid. Dimensions: 23-3/4 W x 3/4 H x 14-1/2 D.

The beam clamp mounting system is designed to provide an easy and secure way of mounting horn speakers to I - beams.

These transformers allow an 8-ohm speaker to be connected to 70V or 25V amplifier outputs. An 8-ohm secondary connects to the speaker and the multi-tap primary connects to the 70V or 25V amplifier output. Watts: 10. Power Taps: 10 5 2-1/2 1-1/4 5/8. Dimensions: 3 W x 1-1/2 H x 1-1/2 D.

The Tile Bridge Support Ring (TBCR) is designed to offer additional mounting support for a variety of installations involving clamping type ceiling speakers. AV Furniture. Mounting Components: Ceiling mount. Recommended Use: Speaker(s).Type: Mounting component.

10 Watt Attenuator allows the output level of a group of loudspeakers to be controlled from a wall-mounted volume control without affecting overall amplifier volume settings. This rugged attenuator has 10 levels of sound control plus an off setting. Adjusts loudspeaker output levels on 25V and 70V systems. Controls up to 10-watt speaker systems.10 attenuation steps and an off setting. Attenuation in 3 dB increments except for two lowest settings which provide 6 dB reduction increments. Mounts in standard gang single electrical box. Simple connections.

The AT35A attenuators allow the output level of a group of loudspeakers to be set from a wall-mounted volume control without affecting overall amplifier volume settings. These rugged attenuators have 10 levels of sound control plus an off setting. Adjusts loudspeaker output levels on 25V and 70V systems. Controls up to 35-watt speaker systems.10 attenuation steps and an off-setting. Mounts in standard electrical box. Simple connections. Dimensions: 4-3/4 W. x 4-3/4 H. x 3 D.

FeaturesWall BaffleConstructed Of 0.375 in. Particle Board with Reinforced CornersSloping Front Panel (13.5 Degrees) Provides Enhanced Downward DispersionHardware for Mounting the Speaker to the Baffle Included

7-watt capacity.8 inch cone speaker for excellent audio quality. T725 4-watt transformer w/ 6 different available power taps(4 2 1 1/2 1/4 1/8 W).Pre-assembled for faster installation. White enamel over steel grille. Works with both 70V and 25V amplifier outputs.6 oz. magnet weights.

Browse our collection of high quality reliable and authentic ComputerPeripherals in desired configuration and compatibility. Whether you want to buy a new computer or add functionality to your computer we have it all for you.. FeaturesRound Speaker - 4 wattsSpecificationsSize: 4 in.. Weight: 1.85 lbs

For VAR1 120V AC 60 Hz 8W 300 mA unregulated UL listed.

FeaturesBogen connector kit22 Gauge30 PiecesHeight: 1.5 in. Length: 5 in. Width - 3 in. Item Weight - 0.25 lbs.

Browse our collection of high quality reliable and authentic Computer & Peripherals in desired configuration and compatibility. Whether you want to buy a new computer or add functionality to your computer we have it all for you. FeaturesCeiling Speaker Assembly with S810 8 in. Cone Recessed Volume Control & Screw-. Terminal Bridge - Bright WhiteSuperior quality productsSpecificationsColor: Bright WhiteSize: 8 inchWeight: 3.5 lbs

4W capacity.8 cone speaker for excellent audio quality.6 power taps available (4W 2W 1W 1/2W 1/4W 1/8W).Available with recessed or knob volume control. Pre-assembled for faster installation. Off-white or bright white enamel over steel grille. For 70V and 25V systems.

FeaturesRack Mount Kit for TPU35B TPU60B and TPU100BSize - 3 W x 8-3/4 H in.

Features2 rack spaces highDimension - 2-1/2 H x 3-1/2 W x 2-1/8 D in.

Line Xfmr 500 Ohm 57 4188 01- Bogen Matching Transformer- Allows Proper Connections Between High (10k-ohm) And Low (600-ohm) Inputs And Outputs- Hi-z 10k-ohm Primary Impedance- Lo-z 600-ohm Secondary Impedance Balanced With Center Tap- Matches High-to-low Impedance Or Low-to-high Impedance- Adapts Line-level Signals To Microphoneinputs- Rca Connector For Hi-z Side- Screw Terminals For Lo-z Side- Small Steel Enclosure W/ Mounting Earsallows Easy Mounting Anyplacebgwmt1a

Hi-Z 10k-ohm primary impedance. Lo-Z 600-ohm secondary impedance balanced with center tap. Matches high-to-low impedance or low-to-high impedance. Adapts line level signals to microphone inputs. RCA connector for Hi-Z side. Screw terminals for Lo-Z side. Small steel enclosure w/mounting ears allows easy mounting anyplace. No wiring or soldering required.

Self - Amplified Ceiling Tile Speaker is a 1 watt clean sounding speaker that installs into ceiling - tile and compliments any commercial audio system. Enjoy clear intelligible sound at offices retail stores etc. The speaker connections are made with standard 600 ohm telephone line and is easily installed. FeaturesSelf - contained 1 - watt amplifierInterfaces with standard 600 - ohm telephone line8 in. Cone speakerCeiling assembly with fixed front - mounted volume control knobOff - white semi - gloss enameled ceiling grille or bright white finish

Every home needs an electronics expert someone who can decide if it makes sense to buy the latest equipments. If you are a gadget freak our Electronics catalog is your dream destination. If you’re still stuck at the basics our elaborate product specifications shall handhold you through the . FeaturesWall Baffle Spk & Xfmr AssyOperates on 24V DC.. Self-contained 1-watt amplifier.. Interfaces with standard 600-ohm telephone line.. Built-in volume control.. Fully assembled in a wall baffle finished in simulated walnut with sloping front panelfor enhanced downward dispersionSpecificationsWeight: 4 lbs

FeaturesRack Unit Telephone InterfaceRack Mount &. Security Cover For Uti1The Rpkuti1 Rack Mount And Security Cover Provides Protection Against Tampering Of The Uti1 Settings And Connections And Offers The Option Of Rack Mounting The Uti1. Knockout Sections On Both The Cover And The Rack Ears Are Provided To Facilitate Wire Entry And Exit

Bogen 4 watt easy install speaker. Installs in seconds with no tools. Contemporary low profile design. No clean-up. Multi-tap. Settings are rotary switch selectable (no transformer wires to deal with).

This paging horn offers high efficiency excellent intelligibility and sturdy all metal construction. FeaturesMaximum speaker power capacity of 15W8-ohm impedanceHigh intelligibility and efficiencyWeatherproof design12 in. connecting cable for easy installationTilt and swivel base for easy aiming

4W capacity 8 cone speaker for excellent audio quality.6 power taps available (4W 2W 1W 1/2W 1/4W 1/8W).Simulated walnut finish. Available with recessed volume control. Pre-assembled for faster installation. Works with both 70V and 25V amplifier outputs.

8 direct radiator designed for on wall mounting with downward dispersion recessed volume control 7W and 15W capacity 4 2 1 1/2 1/4 and 1/8W at 25V and 70V) preassembled mounting notch wooden enclosure with black grille cloth 9.5H x 9.5W x 5.25D simulated walnut finish.

The Bogen Communications MB8TSL 8 in. Metal Box Speaker is an all-steel surface mounted speaker enclosure. The MB8TSL features an 8 in. cone loud-speaker and a multi-tap 4W 70V/25V transformer. Mounting hardware is included. FeaturesAll steel surface-mounted enclosureFull range 8 in. cone speaker for excellent intelligibilityCompatible with 25V or 70V amplifier systemsMultiple taps at 4 2 1 1/2 1/4 & 1/8 watts4 Watt maximum output powerMounting hardware such as toggle bolts wood screws and wire crimpsVR Models feature recessed volume control at the center of front speaker grille

Bogen Wall Baffle Speaker WALNUT - Bogen wall baffle speaker- 8 Cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille cloth on front- 1 Watt single-tap speaker- Recessed volume control designed for use in 70V amplifier systems- Designed for easy wall-mount installation- Comes pre-assembled- Power rating (RMS): 1 Watt continuous- Frequency response: 50Hz to 12kHz- Impedance: 4900 ohms Dimensions: 9.5 W x 9.5 H x 5.25 D (3.25 D at bottom)- Shipping weight: 19lbs.- WalnutBGWB1EZ

The WMT1AS Input/. Line Transformer from Bogen is designed for matching inputs from or outputs to a 600-ohms line. The WMT1AS can also adapt speaker-level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier. FeaturesThis transformer may be used to connect telephone systems to most Bogen PA amps for telephone pagingCan also adapt speaker-level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier. Works as an output-matching transformer in feeding material over a 600-ohm telephone line for "music-on-hold" while connecting with 25V output terminal600 Ohm Impedance MatchingSupports 25V & 70V Speaker Signals

Gain/Trim control. Bass and Treble controls. Gate feature mutes lower priority modules. Mute send and receive. Variable ducking level when muted. Fade back from mute.4 Priority levels. Bus assignable. RCA connectors.

Bogen metal box speakers. Rugged all-steel surface-mounted enclosure. Full range 8 cone speaker for excellent intelligibility. Compatible with 25V or 70V amplifier systems. Multiple taps at 4 2 1 1/2 1/4 1/8 watts 4-watt maximum output power. Mounting hardware included (toggle bolts wood screws and wire crimps).Knockouts for Wiremold. Recessed volume control at the center of front speaker grille.

Bogen self-amplified wall baffle speaker.1 Watt.8 Cone speaker. Operates on 24V DC. Self-contained 1-watt amplifier. Interfaces with standard 600-ohm telephone line. Built-in volume control. Fully assembled in a wall baffle finished in simulated walnut with sloping front panelfor enhanced downward dispersion. Walnut. Height: 5.5. Length: 10. Width: 9.5. Color: White.

Transformer Balanced Line. Transformer-isolated line level input. Gain/Trim control. Bass and Treble controls. Variable ducking level when muted. Fade back from mute. Screw terminal.

FeaturesHigh sensitivity and exceptional power handlingHemispherical mounting system makes it simple to mount aim and lock-in position of loudspeaker4-1/2 Metal-alloy MDT mid/bass speaker cone is extremely stable in all environmentsMLS Ferrofluid voice coil centering replaces distortioncausingMechanical spider and seals magnet gap1 Titanium high frequency driver delivers clear articulate response and consistent long-term performanceWide even coverage over listening areaHigh-density injection-molded cabinet provides an exceptional cosmetic finishLow-resonance cabinet structurePrecisely designed low-frequency tuning for proper balanceAdvanced polymer compound cone surrounds resist UV rays chemicals and salt sprayAluminum-alloy & Titanium cones UV-protected ABS cabinets and powder-coated aluminum grillesMounting brackets assure long-term cosmetic and sonic durabilityPressure clamping input terminals for quick installationSpecificationsColor: WhiteWattage: 75WImpedance: 8 ohm

FeaturesHigh-performance loudspeakerSpecificationsWatt: 75WPower Capacity: 8 OhmWeight: 5.85 lbs

Bogen loop start interface/power supply.24V talk battery supply for loop start ports. Buffered audio output for up to 25 self-amplified speakers.450 mA 24V DC power supply for external equipment. Integral flange and rubber feet for wall or shelf mounting.6 Terminal barrier strip. UL and C-UL listed.

Bogens Easy Design line of horn loudspeakers are compact high intelligibility reentrant type loudspeakers designed for use with 70V amplifier systems. Their sturdy weatherproof all metal construction is ideal forindoor and outdoor use in industrial plants warehouses schools construction sites transportation terminals and recreational areas. The HS7EZ is a 7.5-watt single-tap speaker; the HS15EZ a 15-watt single-tap speaker; and the HS30EZ a 30-watt single-tap speaker. All three models include a stepped attenuator volume control and come with a swivel and tilt mounting base for greater flexibility in setting the angle of projection. Both the speakers and the mounting brackets are attractively finished in textured mocha enamel. Single-tap design. Stepped attenuator volume control.12 lead wire for electrical connections. Designed for 70V amplifier outputs. Swivel and tilt mounting base for flexibility in coverage. High intelligibility and efficiency. Weatherproof all metal construction. I-beam mounting clamp (optional) (Model BC1).

FeaturesHemispherical mounting system makes it simple to mount aim and lock-in position of loudspeaker5-1/4 metal-alloy MDT mid/bass speaker cone is extremely stable in all environmentsMLS Ferrofluid voice coil centering replaces distortioncausing mechanical spider and seals magnet gapProfessional Grade 1-1/2” diameter woofer voice coil provides higher output level and ultra-low distortion1 Horn-loaded titanium high frequency driver delivers clear articulate response and consistent long-term performanceWide even coverage over listening areaHigh-density injection-molded cabinet provides an exceptional cosmetic finishLow-resonance cabinet structurePrecisely designed low-frequency tuning for proper balanceAdvanced polymer compound cone surrounds resist UV rays chemicals and salt sprayAluminum-alloy & Titanium cones UV-protected ABS cabinets Powder-coated aluminum grilles and mounting brackets assure long-term cosmetic and sonicDurabilityPressure clamping input terminals for quick installationSpecificationsColor: BlackWattage: 150WImpedance: 8 ohmWeight: 9 lbs

FeaturesThe TL600 from Bogen is a plug-in transformer rated at 600-ohm for use with power amplifiers. TL600 provides 600-ohm output for use with a Bogen mixer pre-amp

The PRS48 from Bogen is a 48V power supply capable of supplying 100mA of regulated DC power for telecom and other equipment such as the Bogen TAMB. The PRS48 power supply is ETL listed to UL standard 60950-1 and is designed for wall mounting. FeaturesInput - 120V AC 60 Hz 24WOutput - 48V DC 100 mA RegulatedConnections - Screw Terminal Barrier StripProtection - Short circuit thermal overload reverse polarityMounting - Plug-InDimensions - 2-1/2 W x 3 H x 1-7/8 D in.

- Bogen telephone interface input module- Loop start or ground start trunk interfacing (requires external power supply)- Dry loop interface to paging ports- Audio-activated paging in dry loop- Gain/trim control- Limiter- Noise gate with threshold and duration- Mute send and receive- 4 Priority levels- Bus assignable- Transformer-isolated- Screw terminal connectionsBGTEL1S

Deploy the Bogen SP158A horn with either a one-way or two-way paging system. A wide frequency response supports intelligent audio letting you clearly hear messages and announcements. Weatherproofing and a metal construction outfit this speaker horn for outdoor installations as well as inside rooms hallways and large facilities. Tilt and swivel the horn's base to direct sound where you want. SpecificationPower Rating - 15 wattsFrequency Response - 275 Hz to 14 kHzImpedance - 8 ohmsVolume Control - N/. AConnections - screw terminalsConstruction - metalFinish - mocha enamel9 in. diameter

5W Self Amplified 24 Volt Horn- Bogen 5 Watt self amplified 24 Volt horn- Digital switching amplifier technology greatly reduces current consumption when compared to conventional ananlog self amplified horn loud speakers- Excellent extended frequency response from 1.6 diameter voicecoil and 90 mm 12-ounce magnet structure- Lowheat dissipatoin of the digital switching amplifier allows units to operate with continuous background music and in higher ambient temperatures than conventional analog amplifiers- Weatherproof UV protected plastic housing- Rotatable horn allows for the use of a wider vertical or horizontal 120 degree dispersion pattern- Removable accesscover protects terminals and volume control- Screw terminal strip for easy wire connections- Simple and secure cast aluminum swivel mount- Complies with FCC Part 15 requirements- High-efficiency digital switching amplifier technology- Low DC current draw and heat dissipation - Unique flare shape provides controlled sound dispersion - Operates with continuous background music& at high ambient temperatures - BeigeBGSAH5

24V@1A Power Supply- Bogen 24V power supply- 24V DC output @ 1A- Designed to supply power to 24V DC equipment from a 120V AC source- Rugged versatile and dependable and are suitable for use with many types of telephone paging equipment amplified speakers and horns tone generators and intercom systems- Use switching technology to provide large current capacities in smallpackages that gate energy directly to the storagecaps at the power supply output. This is a highlyefficient way to convert voltages resulting inminimal heat generation.- Wall-mounted version includes special mounting holsters for easy and secure wall mounting. The holsters are fastened to the wall and then the power supply is slipped in. The holster’s spring action tab ensures the power supply is secure. A side-mounted PCB provides a means of breaking out the power supply’s cable connector into multiple screw terminals- Screw terminals are also pluggable for added ease of installation- Offers barrel-type connectors or stripped and tinned wire for flexibility and convenience- UL listed- 2 Year manufacturer s warranty-(+20) Bogen Power UnitsBGSPS2410

The Bogen SPT15A and SP158A are compact high intelligibility reentrant type loudspeakers designed for one-way or two-way* sound and communication systems. Their sturdy weatherproof all metal construction is ideal for indoor and outdoor use in industrial plants warehouses schools construction sites transportation terminals and recreational areas. Screw terminals make installation fast and easy. The Model SPT15A has a built-in variable impedance selector switch for matching the speaker power requirements to a 25V or 70V constant-voltage line. The model SP158A has an 8-ohm impedance. Engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning field replaceable diaphragm) use of Bogen horn-type loudspeakers saves both time and money. The speaker and mounting bracket are handsomely finished in textured mocha enamel. It has a 9 diameter and is 9-1/4 deep. These are not talk back horns. Their use in two-way applications requires additional equipment. High intelligibility and efficiency; ideal for both one-way and talk back applications. Weatherproof all metal construction.15 watts; 25/70 volt operation. Variable-tap impedance selector on SPT15A.

Bogens Easy Design line of horn loudspeakers are compact high intelligibility reentrant type loudspeakers designed for use with 70V amplifier systems. Their sturdy weatherproof all-metal construction is ideal for indoor and outdoor use in industrial plants warehouses schools construction sites transportation termi-nals and recreational areas. The HS15EZ is engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning field replaceable diaphragm) which save both time and money. The speaker and the mounting bracket are attractively finished in textured mocha enamel. Single-tap design. Stepped attenuator volume control. Screw terminal connections for fast installation (HS15EZ and HS30EZ models).Designed for 70V amplifier outputs. Tilt and swivel mounting base for flexibility in coverage. High intelligibility and efficiency. Weatherproof all-metal construction. Mountable to I-beam flange using Bogens BC1 Beam Clamp (sold separately).HS15EZ model mountable to electrical box using Bogens HSES10 mounting strap (sold seperately).Terminal Cover (TCSPT1) allows connection of conduit fittings to horn speakers (sold separately).Power Rating (RMS): 15W. Frequency Response: 275 Hz to 14 kHz. Impedance: 326 ohms. Sound Pressure Level: 121dBspl. Dispersion: 110°.Dimensions:9 Dia. x 9-1/4 D.

The Bogen AH5A and AH15A are self-contained one-way amplified paging horn assemblies with screwdriver-adjustable volume controls. They are ideal for expanding the capability of telephone paging systems in highnoise areas. Their sturdy weatherproof allmetal construction make them ideal for use in industrial plants warehouses schools construction sites transportation terminals and recreation areas. Universal mounting brackets permit adjustment in vertical and horizontal planes; banding slots are provided for ease in securing the horns to beams and pillars. Quick connections to audio and power sources are easily made with the 24-inch color-coded cable. A plastic cover protects the volume control and provides cable strain relief. Field maintenance is facilitated through the use of self-aligning field-replaceable diaphragm assemblies mounted within a waterproof housing. Speaker and mounting bracket are finished in an attractive durable textured mocha enamel. High intelligibility and efficiency. Wide frequency response.5 Watts or 15 watts with integral volume control. Weatherproof all metal construction.

We are dedicated to give everyone the very best houseware products for all home needs with a focus on dependability our client satisfaction and great quality. We provide high-quality modern products to be enjoyed by many clients. FeaturesSound Pressure Level MeterFast/slow time weighting plus rangeData logging with clock and accuracyUsb mini interface with electronic calibrationSpecificationsWeight: 2 lbs

Bogens 24V DC Power Supplies are designed to supply power to 24V DC equipment from a 120V AC source. They are rugged versatile and dependable and are suitable for use with many types of telephone paging equipment amplified speakers and horns tone generators and intercom systems. The SPS versions use switching technology to provide large current capacities in small packages that gate energy directly to the storage caps at the power supply output. This is a highly efficient way to convert voltages resulting in minimal heat generation. The wall-mounted SPS versions of power supplies (SPS2410 SPS2425 and SPS2454) include special mounting holsters for easy and secure wall mounting. The holsters are fastened to the wall and then the power supply is slipped in. The holster s spring action tab ensures the power supply is secure. A side-mounted PCB provides a means of breaking out the power supply s cable connector into multiple screw terminals. The screw terminals are also pluggable for added ease of installation. Digital switching technology provides large current capacities in small packages with minimal heat generation (SPS models).24V DC Output. Wide selection of current capacities (300 mA to 5.4A range (+6 to +108 CU s)).Pluggable terminal strips (SPS2410 SPS2425 and SPS2454) for added ease of installation. Mounting holsters for easy and secure wall mounting (SPS2410 SPS2425 and SPS2454).PRS2403 and SPS2406 offer barrel-type connectors or stripped and tinned wire for flexibility and convenience. All models UL listed.

Bogens CSD1X2 Drop-In Ceiling Speakers are 1 X 2 speakers that allow for fast and easy installation. Just make one simple cut to the ceiling tile lay the support rail crossbar (included) across the ceiling grid and drop the speaker into place. Finely perforated grille over the entire front of speaker. Fully enclosed industrial grade steel construction. Enclosed Back Can.8 main cone with secondary high-frequency cone.70V/25V 4-watt transformer (4 2 1 0.5 0.25 watt) taps; selected by rotary switch. Seismic attachment point. Available in off-white and bright white (U versions) grille finish. VR versions have a Recessed Volume Control (front-mounted).Complies with Requirements of UL-2043. Support Rail Crossbar (included).

Monitors audio activity over a wide range of input voltages. Two sets of C-form (both N. O and N. C) relay contacts respond to audio activity. Four levels of signals: microphone 600-ohm line 25V and 70V speaker systems. Built-in balanced low noise high gain microphone pre-am. Transformer-isolated 600-ohm small signal level output of detected audio available. Works with self-amplified or central-amplified paging systems. Separate microphone pre-amp gain control. Adjustable release delay: 0.25s to 25s. Trigger threshold adjustment. Relay active indicator light. Dimensions: 3 H x 8.5 L x 7.25 W. Color: Black. Country of Origin: Korea.

15W Self Amplified 24 Volt Horn- Bogen 15 Watt self amplified 24 Volt horn- Digital switching amplifier technology greatly reduces current consumption when compared to conventional ananlog self amplified horn loud speakers- Excellent extended frequency response from 1.6 diameter voice coil and 90 mm 12-ounce magnet structure- Low heat dissipatoin of the digital switching amplifier allows units to operate with continuous background music and in higher ambient temperatures than conventional analog amplifiers- Weatherproof UV protected plastic housing- Rotatable horn allows for the use of a wider vertical or horizontal 120 degree dispersion pattern- Removable access cover protects terminals and volume control-Screw terminal strip for easy wire connections- Simple and secure cast aluminum swivel mount- Complies with FCC Part 15 requirements- High-efficiency digital switching amplifier technology- Low DC current draw and heat dissipation - Unique flare shape provides controlled sound dispersion - Operates with continuous background music & at high ambient temperatures - BeigeBGSAH15

30Watt Reentrant Horn Loudspeaker- BogenReentrant type loudspeaker- 30 Watt- Compact high intelligibility- Designed for one-way or two-way sound and communication systems- Sturdy weatherproof all metal construction is ideal for indoor and outdoor use in industrial plants warehouses schools construction sites transportation terminals and recreational areas- Screw terminals make installation fast and easy- Built-in variable impedance selector switch for matching the speaker power requirements to a 25V or 70V constant-voltage line- Engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning field replaceable diaphragm)- Speaker and mounting bracket are handsomely finished in textured mocha enamel- Beam clamp is also available (optional BC1)- High intelligibility and efficiency ideal for both one-way and talk backapplications- Weatherproof all metal construction- 30 Watts 25/70 volt or 8-ohm operation- Rotary tap impedance selectorBGSPT30A

Compact high intelligibility. Designed for one-way or two-way sound and communication systems. Sturdy weatherproof all metal construction is ideal for indoor and outdoor use in industrial plants warehouses schools construction sites transportation terminals and recreational areas. Screw terminals make installation fast and easy. Built-in variable impedance selector switch for matching the speaker power requirements to a 25V or 70V constant-voltage line. Engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning field replaceable diaphragm).Speaker and mounting bracket are handsomely finished in textured mocha enamel. Beam clamp is also available (optional BC1).High intelligibility and efficiency ideal for both one-way and talk backapplications. Weatherproof all metal construction.30 Watts 25/70 volt or 8-ohm operation. Rotary tap impedance selector.

Provides three zones of paging to the PCM2000 system. Up to three modules can be used in a basic system to provide up to 9 paging zones. Additional modules can be combined with a PCMZPM module in a satellite system when more than 9 zones are required. Programmable talk back option and background music options for each zone. Each zone can be connected or disconnected from the background music bus. Country of Origin: Korea.

FeaturesVersatile usage in any environment indoors or outdoors without affecting sound quality. SAH Series Horn Speaker powered horn loudspeaker has an excellent extended frequency response from 1.6 in. diameter voice coil and 90 mm. 12 oz. magnet structureIt employs digital switching amplifier technology resulting in low DC current draw and low heat dissipation. It features a weatherproof UV-protected plastic housing.

The Bogen PCMCPU microprocessor module is designed for the Bogen PCM Zone Paging System. One module is required per assembly (up to three PCMZPM zone modules). The PCMCPU module provides power data and audio connections for the PCM system. FeaturesOne zone to 99 zones of simultaneous high-power and low-power pagingUp to 32 paging zone groupsUniversal analog telephone interface designed for direct connection to loop start and ground start trunks to PBX or KEY paging ports which supply DTMF capability and to analog T/. R linesModular integration assures reconfiguring and expansion with minimum time and expenseOptional talk back paging and time-triggered signaling events with PCMTBM moduleField programmable using DTMF and switches

Tone Signal Generator4 Types Of Tones: Steady Pulsed Alarm Slow Whoop And ChimeTones Triggered By External Contact Closure (momentary Or Long Duration)Choice Of Continuous Generation Of Tones Or Twoburst Operation (except For Steady Tone)External Audio Signal Can Pass Through Tg4c And Is Suppressed During Tone GenerationAdjustable Tone Level And Pitch600ohm OutputBrand: Bogen

Drop-In Ceiling Speaker is a full-range speaker that allows for fast and easy installation which saves installation time effort and cost. Just make one cut to the ceiling tile position the support rail and drop the speaker into place Finely perforated grille over the entire front of speaker Fully enclosed industrial grade steel construction 70V/25V 4-watt transformer (4 2 1 .5 .25 watt) taps; selected by rotary switch Main cone with secondary high frequency cone For use with both suspended tile ceilings Support rail crossbar (included).

24V 2x2 Amplified Drop-In Ceiling Speaker is a full-range 1-watt self-amplified speaker that is quick and easy to install. Only available in package of 2. Quick and easy to install; wire and drop in place.2 x 2 design fits in 2 x 2 and 2 x 4 ceiling grids. Finely perforated grille over entire front of speaker panel.8 full-range cone speaker. Self-contained 1-watt amplifier. Front-mounted volume control. Fully enclosed industrial grade steel construction. Support rail for 2 x 4 ceilings included.

The Dynamic Desktop Microphone is a high-quality dynamic unit-directional goose neck desktop microphone ideal for any podium or PA system. It features a 16 in. long fully flexible goose neck stalk that is shock mounted to a heavy zinc die cast base a unit-directional pickup pattern and a 10-foot cable with external contact closure outputs for the talk switches. The goose neck permits the user to adjust the microphone's angle and height to suit the user's needs. Other features include a push-to-talk switch for momentary paging and a push-to-lock switch for continuous audio. SpecificationsMIC Type: DesktopElement: Moving coil dynamicPolar Pattern: Una-directionalImpedance: 500-ohmFrequency Response: 100Hz to 12kHzSensitivity: -76dB +/- 3dBS/. N Ratio:>65dBCable: 10 ft. 5-conductor cableSwitches: Push-to-lock and push-to-talkMaterial: Zinc die castFinish: Matte black

Bi - directional Loud Speaker Horn with Twin Re - entrant Horns offers high efficiency excellent intelligibility and sturdy all metal construction. Includes twin re - entrant horns for bi - directional projection. FeaturesRotary switch - selected power tapsTilt & swivel base for easy aimingWeatherproof design. Power Rating (. RMS) - 30 watts continuou 40 watts equalizedFrequency Response - 225Hz to 14kHzImpedance - 25/70 voltsSound Pressure Level - 121dB at four feet on axis with 30 watt; input at 1000Hz each hornDispersion - 100 Degrees each hornSensitivity as Microphone - - 22dBm [. Ref - 10 dynes/cm2]. Size - 9 - 5/8 dia. x 12 - 1/8 D in. Finish - Textured mocha enamelImpedance Selector Switch Settings - 25V at 15 7.5 3.7 1.8 watts 70V at 30 15 7.5 3.7 1.8 watts

- Twins reentrant horns for bi-directional projection- High intelligibility and effiency- Ideal for both one-way and talkback paging applications- Weatherproof- Sturdy all-metal construction- 30 Watts max at 70V operation or 15 watts max at 25V operation- Tap settings for 70V: 30 15 7.5 3.7 1.8 watts; for 25V: 15 7.5 3.7 1.8 watts- Rotary tap impedance selector switch - Screw terminals make installation fast and easy- For indoor and outdoor use- Uniquely designed all-purpose mounting bracket for simple installation- Self-aligning field-replaceable diaphragm for easy maintenance- Limited lifetime warranty- Mountable to I-beam flange using Bogens BC1 beam clamp (sold separately)- Mountable to elictrical box using Bogens HSES10 mounting strap (sold separately)- Terminal cover (TCSPT1) allows connection of conduit fittings to horn speakers (sold separately)BGBDT30A

Bogen 2 ft x 2 ft drop-in speaker.70V/25V 4W transformer (4 2 1.5.25 watt) taps; selected by rotary switch.8 main speaker cone with 10 oz. magnet plus secondary high frequency cone. Front-mounted recessed volume control available (VR).

Bogen classic amplifier.10 Watts. Offers dependable performance and flexibility. UL and CSA listed. Designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages. Transformer isolated 4. 8. 16. 25V and 70V output taps. Rear panel auxiliary receptacle. One dedicated MIC 1 input Lo-Z balanced. One switchable MIC 2/AUX 1 input. Contact muting of AUX input. Separate rear panel-mounted TEL volume control. Voice activated muting of AUX input by Tel input. Variable trigger threshold for voice activation. Optional wall mount kit.

Door Phone is a convenient remote weather - resistant hands - free two - way terminal device for telephone systems. The unit is telephone line powered and includes adjustable microphone and speaker volume levels as well as a selectable Auto Answer feature to allow for remote audio monitoring of the area where it is located. This Door Phone also includes an adjustable and defeatable call timer and can respond to forward disconnect signals. A heavy - gauge stainless steel gasket faceplate and plastic cone speaker with puncture resistant screen. It is designed to fit in most indoor and outdoor dual gang electrical boxes (user supplied). A dress bezel is included with the unit for trimming out rough openings in flush mount applications. FeaturesAnalog ring down line operationSuitable for indoor or outdoor station door or gate communicationTelephone line poweredTwo - way hands - free communicationWeather - resistantVandal - resistant brushed stainless steel face plate with mounting gasket and heavy - duty call buttonPlastic cone speaker with puncture - resistant protective screenRough opening dress bezel for flush mount installationsAdjustable microphone and speaker volumeAdjustable call timer durationDefeatable call timerResponds to forward disconnectSelectable Auto Answer feature allows remote audio monitoring of ADP1 location". Active" LED for use when installing and troubleshooting

- Bogen Analog door phone- Telephone line powered- Hands-free 2 Way communication- Analog ring-down operation- Weather and vandal resistantBGADP1

Single Zone Paging Controller- Bogen single-zone paging universal telephone interface- Compatible with all standard analog port types-Includes 2 audio outputs with level controls each of which can provide audio for 150 Bogen self-amplified speakers- Telephone interfaces: loop start trunk ground start trunk station access (analog ring-up) page port contact closure activation page port voice activation- Simple 2-switch interface setup- Programmable activation of AUX contacts- C-form contact- High-impedance transformer isolated background music inputs with volume control- Override paging (using loop start trunk or page port contact closure activation) with zone group- Night ringer (contact closure activation)- Tone triggers (tone and duration selectable closure activated) with individual zone groups- Tone burst (2 to 7 seconds) chime or slow whoop- Non-volatile memory for setup data (nobackup battery required)- Setup Tone to assistin volume setting- Pluggable terminal strips- Microcontroller-based operation- DTMF programming- DTMF Block to help suppress DTMF tones over paging system- Programmable timers control page duration (station and trunk)- Wall- or Rack-mountable- 2 Year manufacturer s warranty-(+20) Bogen power unitsBGUTI1

Dual purpose voice paging adapter designed as an interface from a telephone system to a paging system includes loop start ground start and station port 600 Ohms output pre-announce and confirmation tones adjustable tone volume works with paging only and 2 way (talk back) systems background music input with volume control suppresses background music during paging station access disconnect Party Control (CPC) signal detection station port maximum page times from 1 to 200 seconds 1 rack space unit 24V power supply required.

The Bogen Classic Series Model C20 offers dependable performance and flexibility. The Classic Series is designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages. Power output: 20 WRMS. Distortion: Less than 1% RPO. Frequency Response: 70Hz to 16kHz 1dB. Outputs: 4- 8- 16 ohms 25V 70V. Power Requirements: 120V AC 60Hz. Dimensions: 13.8 x 10.2 x 5.5.

The UHF Bogen Body-Pack Wireless Microphone System offer users the freedom to move around while speaking. System choices consist of a 800-channel PLL-synthesized UHF Receiver with either a hand held microphone or lavaliere microphone and body-pack transmitter.

FeaturesUHF Wireless Handheld Microphone System. Includes - UHT800 Handheld Mic and UDR800 UHF Receiver.800-channel PLL-synthesized UHF Receiver offers 800 user-selectable frequencies.120 dB dynamic range. Operation up to 500' line-of-sight. Uni-directional neodymium dynamic mic cartridge for optimum sound maximum feedback rejection and minimal noise handling. Audio mute switch for transmitter.1/2 rack receiver design.

Buy various types of Audio accessories for your equipment and enjoy uninterrupted technical facility at home or office. Our products are all constructed to be reliable and durable and suit variety of applications. Features40 watt 5 IPft. S 2 PRI Levels Mixer-. Amplifier with Telephone Mute Input for InstallsHigh quality construction and modern designsSuperior quality performance and reliabilitySpecificationsWattage: 40Weight: 11.9 lbs

FeaturesInterfaces a telephone system with a paging system to allow paging announcements to be made through anyUpdated version of the venerable TAMB functionally the sameLoop start ground start &station start (90V ring up) compatibilityBidirectional for two-way systemsRack mount or wall mount; half-rack width units can be mounted side by side

FeaturesInterfaces a telephone system with a paging system to allow paging announcements to be made through any telephoneUpdated version of the venerable TAMB functionally the sameLoop start ground start &station start (90V ring up) compatibilityBidirectional for two-way systemsRack mount or wall mount; half-rack width units can be mounted side by sidebackground music input with volume controlUL60950 listed; FCC registeredPower supply required (not included); PRS2403 recommended. Height - 6Length - 9Width - 2Color - BlackItem Weight - 1.75 lbs.

PLL synthesized tuning with digital readout 60 FM and AM presets with scan stereo and mono outputs (1V minimum) via RCA jacks alphanumeric fluorescent display panel 75 Ohms FM 300 Ohms FM and AM loop antennas connectors volume control (rear panel) includes FM dipole and AM loop antennas remote control and stereo output cable shelf or rack mounted (1 rack space) removable rack ears included 16.9W x 1.75H x 10D (without feet).

Each input controlled by an independent volume control. AUX muting by external contact closure for pushto- talk mics. Variable threshold for TEL input voice-activated AUX mute. Thermal protection and electronic shutdown. Rack mountable with accessory mounting kit. Output Wattage: 35. Color Name: Black. Display Height: 3.7.

If you are a gadget lover our Electronics catalog is your dream destination. Choose from hundreds of gadgets and accessories to suit different uses and add some entertainment facility and convenience to your life. FeaturesCall In Module for Sba225SpecificationsWeight: 3 lbs

Bogen's Power Vector Mixer is an 8-channel mixer/pre-amplifier offering a wide variety of operational features and functions for superior audio performance. Eight module bays accept plug-in input modules allowing up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status and an 11-segment LED output level meter that monitors output signal level. In addition the VMIX has a motorized master volume control (that can be controlled using a remote control panel RVCP ) bass and treble control Avg/. Peak switch unbalanced output jack and balanced output terminal. Optional security covers prevent tampering of settings. The VMIX can be used for various applications including foreground music background music and paging. For large applications several VMIX units can be bridged together.

Bogen 35 watt wall-mounted telephone paging amplifier. Inputs for 600-ohm balanced telephone line LO-Z balanced microphone and background music. Integral automatic level control circuit for controlling pages made by persons with varying voice levels and paging techniques. Page from telephone and/or microphone. Signal-activated paging channel automatically mutes background music. Adjustable background music muting level during a page. Music gradually returns to its normal level after a page. Aphex Aural Exciter increases intelligibility improves perceived loudness (with no increase in power) and reduces listener fatigue. Seperate controls for page volume music volume night ringer music mute and Aphex Aural Exciter. Bass and treble controls. Built-in night ringer activated by contact closure or by 90V ring signal. Balanced or unbalanced 16-ohm 25V 25VCT and 70V outputs. VOX sensitivity level control eliminates transmission of background noise when paging from a telephone. Thermal and electronic overload protection. Jacks provided for bridging additional TPU amplifiers. Brackets are attached for easy wall mounting. Peak level indicator lights when amplifier is driven into clipping.120V AC 60Hz power source. UL and CSA listed.

Features4 dedicated MIC inputs1 selectable MIC / TEL input1 selectable MIC / AUX input1 dedicated AUX input4 Ohm direct coupled output25 VCT and 70V coupled outputsDual function 10 band graphic EQTrue loudness contour functionAudio enhancement circuitSwitchable phantom powerVariable aux input mutingRemote master volume controlAuto level controlInput muting via contact on all inputsVoice activated aux muting on tel inputAux fade back after tel pageSpecificationsWeight: 1.2 lbs

The Bogen TPU100B Paging Amplifier features 100 watts of power is wall mounted and provides inputs for a paging microphone music source external telephone ringer music mute trigger and more. The TPU100B amplifies background music and pages sent via telephone lines in any office setting retail space etc. A variable music mute function adjusts the mute level of background music during pages and the on-board Aphex Aural Exciter feature improves tonal quality and enhances intelligibility of the pages. There is an on-board ALC limiting circuit that prevents overload and distortion due to excessive audio peaks. Separate microphone and music volume controls also provide flexible control over the audio mix.100W amplifier. Choice of outputs include 16-ohm 25VCT 25V 70V balanced or unbalanced. Choice of inputs include RCA or screw-terminal Music Input balanced microphone input music mute trigger contact ring telephone ring and ground. Flat design for easy wall mounting. Comprehensive dial controls on the front panel. Music Mute variable level adjustment. Aphex Aural Exciter tonal enhancement feature. Maximum Amplifier Power: 100W. Frequency Response: 70Hz to 15kHz +/- 1dB. Hum and Noise: -70dB (From 20Hz to 20KHz).Distortion: Less Than 1% (80Hz to 15kHz). Screw Terminals: Music Mute Mic Balanced GND TEL Music In GND Contact Ring Tel RingRCA. Music and Bridging. Screw Terminals (Removable Panel): 16-ohms 70V 25V 25VCT COM and GND.

The PCMSYS3 is a pre-assembled and tested 3-zone PCM2000 system with a PCMPS2 power supply. Use it right out of the box for 1 to 3 zone applications or expand it with other PCM modules. Provides all the same great features found in the PCM2000 zone paging system. FeaturesProvides 1 to 3 paging zonesExpandable up to 99 zonesUp to 32 programmable paging zone groupsEmergency All-Zone Override Paging inputTwo-way Communications250W power handling capacityCode CallingBackground Music distributionWorks with systems that are central- or self-amplifiedDrives up to 40 self-amplified speakers per zone moduleNight Ringer 90V and contact closureReal-time Clock & Master Clock SynchronizationTime Triggered Signaling Tones

Bogen 100 watt wall-mounted telephone paging amplifier. Inputs for 600-ohm balanced telephone line LO-Z balanced microphone and background music. Integral automatic level control circuit for controlling pages made by persons with varying voice levels and paging techniques. Page from telephone and/or microphone. Signal-activated paging channel automatically mutes background music. Adjustable background music muting level during a page. Music gradually returns to its normal level after a page. Aphex Aural Exciter increases intelligibility improves perceived loudness (with no increase in power) and reduces listener fatigue. Seperate controls for page volume music volume night ringer music mute and Aphex Aural Exciter. Bass and treble controls. Built-in night ringer activated by contact closure or by 90V ring signal. Balanced or unbalanced 16-ohm 25V 25VCT and 70V outputs. VOX sensitivity level control eliminates transmission of background noise when paging from a telephone. Thermal and electronic overload protection. Jacks provided for bridging additional TPU amplifiers. Brackets are attached for easy wall mounting. Peak level indicator lights when amplifier is driven into clipping.120V AC 60Hz power source. UL and CSA listed.

Features4 dedicated MIC inputs1 selectable MIC / TEL input1 selectable MIC / AUX input1 dedicated AUX input4 Ohm direct coupled output25 VCT and 70V coupled outputsDual function 10 band graphic EQTrue loudness contour functionAudio enhancement circuitSwitchable phantom powerVariable aux input mutingRemote master volume controlAuto level controlInput muting via contact on all inputsVoice activated aux muting on tel inputAux fade back after tel pageSpecificationsWeight: 2.9 lbs

Features4 dedicated mic inputs1 selectable mic / tel input1 selectable mic / aux input1 dedicated AUX input25 VCT and 70V coupled outputsDual function 10 band graphic EQTrue loudness contour functionAudio enhancement circuitSwitchable phantom powerVariable aux input mutingRemote master volume controlAuto level controlInput muting via contact on all inputsVoice activated aux muting on tel inputAux fade back after tel pageSpecificationsWeight: 0.7 lbs

The Bogen Digital Feedback Terminator provides high quality recording and playback of audio pages. The Digital Feedback Terminator breaks the acoustical feedback loop created by the telephone handset and paging speaker. The page is first recorded and then played back as soon as the source handset has been put on-hook. High capacity paging is accomplished by the Digital Feedback Terminator's record during playback and page stacking capabilities. User selectable loop start trunk or 4 wire dry loop input interface and selectable 8 ohm or 600 ohm output impedances allow the Digital Feedback Terminator to directly connect to a wide range of customer premise equipment. SpecificationsAudio Memory Capacity: 240 SecondsMaximum Message Length: 60 SecondsMessage Stacking Capacity: 16 MessagesAudio Sampling: 12 Bit word at 16 kHzFrequency Response: 100 Hz to 6.8 kHz +/-3 dBDistortion: